SAM150
Dual Bolt AssemblySAM150 Dual Bolt Assembly
Machined oval dual point latch. The SAM 150 series latches have been tested to withstand 500lbs static load at the bolt ends (worst case scenario) without any adverse effect to the latch. Uses Striker SAM-233-9-x (1 thru 6)
| Part Number | Pictures |
|---|---|
| SAM150-1 |
Sam150-1 is flat body, two bolts operated by one lift handle, and is unfinished and unassembled. |
| SAM150-2 |
Same as SAM150-1, sold assembled and with Satin Grain Anodized Finish. |
| SAM150-3 | Obsolete |
| SAM150-4 | Obsolete |
|
SAM150-5 SAM150-9 SAM150-13 SAM150-18 SAM150-21 |
SAM150-5 Shown above 
SAM150-9 Shown above Dual handle, Contoured (domed) body, two bolts operated independently by two lift handles -5 Unassembled, Unfinished -9 Assembled, Satin Grain and Rocho Lac. -13 Assembled, Clear Anodize -18 Assembled, Clear Anodize, Red Decal -21 Assembled, Satin Grain and Rocho Lac, Red Decal |
| SAM150-6 | Special |
| SAM150-7 |
Special version with a key lock |
| SAM150-8 |
Same as SAM150-7 Except sold assembled and finished with clear anodize |
|
SAM150-10 SAM150-45 |
Same as -7 Except with special design for a Customer Provided custom proprietary lock -10 With cover plate -45 Without cover plate |
|
SAM150-11 SAM150-12 SAM150-19 SAM150-22 |
Has a lock ring to insert a customs seal if needed. -11 Unassembled, Unfinished -12 Assembled, Satin Grain and Rocho Lac -19 Assembled, Satin Grain and Rocho Lac, Red Decal -22 Assembled, Satin Grain and Rocho Lac, Red Decal Material for housing and lift handle is 7075-T6 instead of 6061. Sometimes used to match interior of aircraft. Also ends up being a stronger version. |
| SAM150-14 |
Special Design Same as SAM150-9, except it comes with no lift handle. It is designed for customer who wants to use their own special customer design lift handle. |
| SAM150-15 | |
|
SAM150-16 SAM150-17 SAM150-28 |
Same as SAM150-5, -9, and -13 except designed with an extended longer bolt Dual handle, Contoured (domed) body, two bolts operated independently by two lift handles -16 Unassembled, Unfinished -17 Assembled, Satin Grain and Rocho Lac. -28 Assembled, Clear Anodize |
|
SAM150-20 SAM150-26 SAM150-24 SAM150-25 |
2 Point Design Same body as the SAM150 series, except this is a 2 point bolting system -20 Satin Brush Finish, End fittings are die cast alum. -26 Unfinished, End fittings are die cast alum. -24 Satin Brush Finish, End fittings are machined alum. -25 Unfinished, End fittings are machined alum. |
| SAM150-27 |
Same as SAM150-5 Except has a deeper housing designed for a deeper 5/8" panel (normal is 1/2"). |
|
SAM150-30 SAM150-31 |
2 Point Design Customer Special |
|
SAM150-40 SAM150-41 |
2 Point Design Same body as the SAM150 series, except this is a 2 point bolting system Has Dual Bolt End Fittings -40 Unfinished, End fittings are die cast alum. -41 Satin Brush Finish, End fittings are die cast alum |
| Part Number | Picture/Dimensions |
|---|---|
| SAM150-1 |
|
| SAM150-2 |
|
|
SAM150-5 SAM150-9 |
|
|
SAM150-7 SAM150-8 SAM150-10 |
Detailed Dims: Click to View 
|